Raspberry Pi Pico Compatible Development Board USB C with Headers (Soldered Version)

• RP2040 microcontroller chip designed by Raspberry Pi
• Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of onboard Flash memory
• The castellated module allows soldering directly to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Onboard temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support

Specification:

Item Type:	Dev. Board
Model Type	Pi Pico
Model	Raspberry Pi PICO
Operating Voltage (VDC):	1.8 ~ 5.5
Processor	RP2040 (Dual-core Arm Cortex M0+) By Raspberry Pi
Interface	2 x UART, 2 x I2C, 2 x SPI, up to 16 PWM channels
RAM	264 KB
GPIO	26 Pins
Clock Speed	133 MHz
On Board Ports	Micro-USB 5V/2.5A DC Power Input Port
Operating Temperature (°C)	-20 to 85
Length (mm):	51
Width (mm):	21
Height (mm):	4
Shipping Weight	0.01 kg
Shipping Dimensions	5 × 2 × 1 cm

This is an soldered Version. If you want soldered version please purcahse from here. Please note: This a compatible version of Raspberry Pi Pico.  Images are for representation only. Actual Image of the product may vary slightly in appreance.