0.96 Inch 4Pin White IIC I2C OLED Display Module For Arduino

Product Description

The 0.96 Inch 128×64 White OLED Display Module is a compact and low-power graphical display designed for microcontroller, embedded, robotics, and DIY electronics projects. With a 128×64 pixel resolution, it provides clear monochrome white graphics and text for displaying sensor values, system status, menus, icons, and other information.

The module uses the I2C/IIC communication interface, requiring only two communication lines, SDA and SCL, along with power and ground. This helps reduce the number of microcontroller pins required and makes the display easy to integrate into projects.

With a wide 3V–5V power supply range and compatibility with both 3.3V and 5V control-chip I/O levels, the display can be used with a variety of development boards and microcontrollers. Its compact dimensions and low power consumption make it suitable for space-constrained and portable applications.

Features

• 0.96-inch compact OLED display
• 128×64 pixel resolution
• White monochrome display
• I2C/IIC serial communication interface
• Uses only SDA and SCL communication lines
• Wide DC 3V–5V power supply range
• VCC operating range of 2.2V–5.5V
• Compatible with 3.3V and 5V logic levels
• Low power consumption
• Approx. 0.06W power consumption
• Compact and lightweight design
• Suitable for text and graphic display
• Easy to integrate with microcontrollers
• Suitable for portable and embedded applications

Specifications

Parameter	Specification
Product Type	OLED Display Module
Display Size	0.96 Inch
Display Colour	White
Resolution	128 × 64 Pixels
Communication Interface	I2C / IIC
Operating Voltage	DC 3V–5V
VCC Range	2.2V–5.5V
Power Consumption	Approx. 0.06W
Operating Temperature	-30°C to 70°C
Dimensions	Approx. 29.28 × 27.1mm
Logic Level	3.3V / 5V Compatible
Communication Pins	SDA / SCL

Interface Pinout

Pin	Description
GND	Power Ground
VCC	Power Supply
SCL	I2C Clock Signal
SDA	I2C Data Signal

Design and Construction

The display module features a small PCB form factor designed for easy integration into compact electronic systems. Its OLED technology provides a bright white display without requiring a traditional backlight, helping maintain low power consumption.

The four-pin interface provides a simple connection to the host controller. The compact dimensions make the module convenient for installation in small enclosures, robots, portable devices, and embedded systems.

Working Principle

The OLED display communicates with a microcontroller through the I2C/IIC protocol. The microcontroller sends display commands and graphical data through the SDA data line, while the SCL clock line synchronizes communication.

Once the display receives the required data, the OLED pixels are activated to produce text, numbers, symbols, graphics, or other visual information. The display can therefore be used as a user interface or real-time information screen in electronic projects.

Applications

• Arduino projects
• ESP32 projects
• Raspberry Pi projects
• Sensor monitoring
• IoT devices
• Robotics projects
• DIY electronics
• Portable devices
• Data display systems
• Temperature and humidity displays
• Voltage and current monitoring
• Status indicators
• Menu and user interfaces
• Embedded systems
• Educational projects
• Automation systems

Advantages

• Compact 0.96-inch size
• Good 128×64 resolution
• Simple I2C/IIC interface
• Requires fewer microcontroller pins
• Wide power supply compatibility
• Supports 3.3V and 5V logic
• Low power consumption
• Suitable for both text and graphics
• Easy to integrate into existing projects

Package Includes

• 1 × 0.96 Inch 128×64 White OLED Display Module

Product Disclaimer

Product images are for representation purposes only. The actual product may vary slightly in colour, PCB layout, component placement, dimensions, or appearance depending on the manufacturing batch.

Please verify the required voltage, I2C address, pin configuration, and controller compatibility before integrating the display into your project.