MCP2562-E/SN MICROCHIP CAN Interface Transceiver IC - SOP-8 Package

MCP2562-E/SN CAN Interface Transceiver IC - SOP-8 Package is a high-speed CAN transceiver designed to provide an interface between a CAN protocol controller and a two-wire CAN bus. It supports CAN communication speeds up to 1 Mbps and provides differential transmit and receive capability. The device is designed for automotive and embedded communication applications, with features including low standby current, high noise immunity, thermal shutdown, and protection against automotive electrical transients.

MCP2562-E/SN-MICROCHIP-CAN Interface Transceiver IC Package Datasheet

Features:

1. High-speed CAN transceiver supporting data rates up to 1 Mbps.
2. Interfaces a CAN controller with a two-wire CAN bus.
3. Differential CAN transmit and receive capability.
4. Compatible with ISO 11898-2 and ISO 11898-5 standards.
5. Low standby current, typically 5 µA.
6. Separate VIO supply for direct interfacing with 3.3 V and 5 V logic controllers.
7. High noise immunity through differential bus operation.
8. Automatic thermal shutdown protection.
9. Protection against short-circuit and high-voltage transient conditions.
10. CAN bus pins are disconnected when the device is unpowered.
11. SOP-8 surface-mount package.

Specifications:

Parameter	Value
Product Type	High-Speed CAN Transceiver
Model	MCP2562-E/SN
Brand	Microchip
Interface	CAN
Number of Channels	1
Number of Drivers	1
Number of Receivers	1
Maximum Data Rate	1 Mbps
Supply Voltage (VDD)	4.5 V to 5.5 V
Logic Supply (VIO)	1.8 V to 5.5 V
Typical Standby Current	5 µA
Maximum Operating Temperature	+125°C
Minimum Operating Temperature	-40°C
Package	SOP-8
Mounting Type	Surface Mount

Pin Configuration:

Pin No.	Pin Name	Description
1	TXD	CAN Transmit Data Input
2	VSS	Ground
3	VDD	Device Supply Voltage
4	RXD	CAN Receive Data Output
5	VIO	Logic-Level Supply Input
6	CANL	CAN Low Bus Line
7	CANH	CAN High Bus Line
8	STBY	Standby Mode Control Input

Also Check These Out:

AN7112 Audio Power Amplifier IC

TDA2822M Amplifier IC

HT12D (RF Decoder) IC

Package Includes:

1 × MCP2562-E/SN Microchip CAN Interface Transceiver IC - SOP-8 Package