MCP2515T I/SO Microchip 5.5V CAN CONTROLLER IC - SOIC-18 Package

MCP2515T 5.5V Stand-Alone CAN Controller IC - SOIC-18 Package is a stand-alone CAN 2.0B controller with an SPI interface, designed to add CAN bus communication to microcontrollers. It supports both standard and extended CAN frames at data rates up to 1Mb/s, features multiple transmit and receive buffers, programmable acceptance filters, interrupt outputs, and low-power operation. It is widely used in automotive electronics, industrial automation, robotics, embedded systems, and CAN-based communication networks.

MCP2515T CAN CONTROLLER IC Datasheet

Features:

1. Stand-Alone CAN Controller
2. CAN 2.0B Compatible
3. Supports Standard and Extended CAN Frames
4. Data Rate Up to 1Mb/s
5. High-Speed SPI Interface up to 10MHz
6. Operating Voltage: 2.7V to 5.5V
7. Three Transmit Buffers with Priority Control
8. Two Receive Buffers
9. Six 29-Bit Acceptance Filters
10. Two 29-Bit Acceptance Masks
11. Data Byte Filtering Support
12. One-Shot Transmission Mode
13. Programmable Clock Output
14. Start-of-Frame (SOF) Output
15. Configurable Interrupt Output
16. Configurable RX Buffer Full Output Pins
17. Configurable Request-to-Send (RTS) Input Pins
18. Low Power CMOS Technology
19. Low Standby Current
20. Industrial Temperature Range
21. RoHS Compliant

Specifications:

Parameter	Value
Product Type	Stand-Alone CAN Controller IC
Part Number	MCP2515T-I/SO
Package	SOIC-18
CAN Standard	CAN 2.0B
Interface	SPI
SPI Clock Frequency	Up to 10MHz
Maximum CAN Data Rate	1Mb/s
Supply Voltage	2.7V ~ 5.5V
Active Current	5mA (Typ.)
Standby Current	1µA (Typ.)
Transmit Buffers	3
Receive Buffers	2
Acceptance Filters	6 (29-Bit)
Acceptance Masks	2 (29-Bit)
Clock Output	Programmable Prescaler
SOF Output	Yes
Interrupt Output	Yes
Operating Temperature	-40°C to +85°C
Mounting Type	Surface Mount
RoHS Compliance	Yes

Pin Configuration:

Pin	Name	Description
1	TXCAN	CAN Transmit Output
2	RXCAN	CAN Receive Input
3	CLKOUT/SOF	Clock Output / Start-of-Frame Output
4	TX0RTS	Transmit Buffer 0 Request-to-Send
5	TX1RTS	Transmit Buffer 1 Request-to-Send
6	TX2RTS	Transmit Buffer 2 Request-to-Send
7	OSC2	Oscillator Output
8	OSC1	Oscillator Input
9	VSS	Ground
10	RX1BF	Receive Buffer 1 Full Output
11	RX0BF	Receive Buffer 0 Full Output
12	INT	Interrupt Output
13	SCK	SPI Clock
14	SI	SPI Data Input
15	SO	SPI Data Output
16	CS	SPI Chip Select
17	RESET	Active-Low Reset
18	VDD	Supply Voltage

Also Check These Out:

AN7112 Audio Power Amplifier IC

TDA2822M Amplifier IC

HT12D (RF Decoder) IC

Package Includes:

1 x MCP2515T I/SO 5.5V Stand-Alone CAN Controller with SPI Interface IC - SOIC-18 Package